Using 6 x 6 Scenic Papers

Today we're looking at using scenic 6 x 6 sized papers.  I have some from a retired set called Meandering Meadows that I need to use up, so I started looking for good ways to use papers like these.  All products used were from Stampin' Up!® (and images © Stampin' Up!) unless otherwise noted.

 

Card #1 (see above):  I found instructions for a "Spanner Card" in a You-Tube video by Glenda Calkins.  It was pretty cool, and I adapted it for this first card (see above).  Especially for scenic papers that have a path, I LOVE this way of using them.  Here's what I did:

• I took a 5 1/2” x 8 1/2” piece of Crushed Curry cardstock and scored and folded it in half to make an A2-sized card base.
• I sliced JUST THE FRONT of this card at 1 1/4" on each side from the bottom to the fold: 
• I glued a 1" x 5 1/2" piece of acetate to JUST the bottom of these side pieces (don't get glue on the middle section!)
• I trimmed the scene to 4" tall (carefully choosing where to cut based on the scene itself), then cut this 4" tall piece it from left to right: 1" strip,  2 3/4" strip, 1" strip.  (There was a bit left over which I saved for later).  I glued the 1" strips centered on the side sides flaps of the card front and the larger piece to the middle flap (you could mat them first if you wish).
• Then I die cut some pieces for a fence and gate using an old Spellbinder's cutting die (Garden Gate).  I carefully glued this in place so that glue only touched the sides and the acetate - and so the gate itself was not glued shut.  See picture above.  This completed the main part of the card structure.
• I stamped a greeting toward the top of the middle section (Spellbinders Sending Sunshine Sentiments), added a piece of white to the inside, and decorated that with a small strip from my leftover pieces - using the back side of the paper this time. Here are a couple of pictures that show opening the card:

Card #2:

This card is made similarly - using Fresh Freesia cardstock and a different patterned paper from the same set.  I had intended to try a black fence, but forgot and cut it out of white again!  Probably for the best anyway.  As you can see, this time instead of just stamping my sentiment on the patterned paper itself, I created a matted greeting (stamp from Spellbinders Welcome Sign and Sentiments).

 

OSW #1:   I next decided to see what I could do to make more than one card from a single sheet.  I chose to call it a 6 x 6 One Sheet Wonder and made 3 cards from the single sheet.  Here's how I cut up my patterned paper:

 

I actually ended up using the reverse side for one of the cards, so what I actually used was more like this: 

Below are the 3 cards that I made from these pieces.

OSW Card #1:

I used the middle strip to make my first card.  I matted it and glued it to the right side of the card front.  Then I created a sentiment using some oval shaped dies and a Stacked Happy Birthday die (Creative Expressions).  I used Cherry Cobbler cardstock for the matting and sentiment.  I also added a couple of strips of this card stock to the inside of the card for a bit of interest:

OSW Card #2:

This next card started as an A2 card base from Garden Green cardstock.  After scoring and folding it to make the A2 size, I cut off 1 1/2" from the right side of the card front.  I added a white cardstock panel to the inside of the card and then a 1/4" strip of the cut off piece to the right side to add interest that would show through to the card front. I matted my patterned paper on white and added it to the left side of the card front.  Finally I created a sentiment using Melon Mambo and white cardstocks, Melon Mambo ink, and a stamp from Changing Leaves stamp set.  The inside looks like this:

OSW Card #3:

This last card used the reverse side of the remaining pieces from the OSW AND scraps from the Garden Gate make (see #1 above).  I started with a piece of Pecan Pie cardstock as a base mat layer (from which I cut many of my mat pieces before gluing it in place).  Then I added a piece of Petal Pink cardstock on top of that.  I matted the 3 patterned pieces with Pecan Pie cardstock (after trimming 3/4" off the bottom of the largest one). and glued them in place as you see in the picture above.  

Next, I created a focal piece - 2 3/8 circle punched from Pecan Pie cardstock forms the bottom layer, then a 2" scalloped circle punched from white cardstock.  This was my base for adding a cluster of small die cut flowers and leaves - cut from the scraps!  I used dies from Otterly Amazing die set for my leaves and from Impressions Abloom die set for the little flowers.  (I die cut some extras which I saved for the inside of the card).

Finally, I created my sentiment piece from strips of white and Pecan Pie cardstock and Pecan Pie ink. I used a stamp from the discontinued Sentimental Rose kit and punched the ends using a retired punch called Lovely Labels Pick a Punch.

 Inside:

As you can see, I added a couple strips of Pecan Pie cardstock and some leaves/flowers to complete the inside of this card.

OSW #2:

I made a 2nd set of cards using the same cutting guide, but a different sheet of patterned paper - and minor variations in the way I made them.  Here are the 3 cards I got from it.

OSW #2 Card #1:

This time, I matted with Blueberry Bushel cardstock and used Blueberry Bushel ink for the sentiment.  I also added a piece of twine near the top of the patterned paper panel.  As you can see, instead of a die cut sentiment, I simply stamped onto the left side of the card front (using a stamp from an old JustRite set called Special Gifts Labels Twenty-Nine.  

OSW #2 Card #2: 

This time I used Balmy Blue cardstock for the card base and matting.  I added a freebie strip greeting from Sassy's LLC.  I decided a cute little critter would complete this card nicely, so I added one from my stash (made from Karen Burniston's Woodland Animals die set).

OSW #2 Card #3:

This one was more difficult, though I ended up making it in a similar way to OSW#1.  The problem was that the flip side of this paper was VERY dark and really didn't coordinate that well with any of the cardstocks because of the way the colors were blended.  I ended up choosing to use a Shaded Spruce cardstock panel that I cut just smaller than an A2 card front - then embossed with the Cane Weave 3D embossing folder.  I then added some Pretty Peacock and Night of Navy inks using a blending tool.  This became my background.  I matted my patterned pieces with white before adding them as you see here.  The sentiment is another of Sassy's LLC - matted on Night of Navy and white card stock. The football was from my stash (created from Spellbinder's Sporting Goods die set).

So, there you have several different ways to use 6 x 6 scenic patterned papers.

Build a Scene

Previously I showed how you can make pretty cards by just cutting up the paper - even if you get partial animals that way!  Today I'm looking at how you can BUILD YOUR OWN SCENE using your patterned papers.  Again, I'm using paper from the Otterly Adorable paper pack.

Card #1 (above):  Unfortunately, I did not remember to get a picture of the panel BEFORE I cut it up. I started by fussy cutting pieces from the panel - one large scene, a log, and a pair of otters sleeping,  Then I started to decide what I wanted to do with them.  I created a bit of a sandy beach (or river bank) using a piece of white card stock and some Crumb Cake ink (applied with a foam applicator).  I nestled my sleeping otters in the lower corner, and glued the scene in place on the "sandy" cardstock.  The log nestled perfectly along the edge of the bank.  

I tried what I had against a white card front and decided I wanted some blue for the sky - so added a piece of Balmy Blue cardstock.  I wanted clouds in the sky and decided I wanted to put my sentiment on one of them.  That was a bit tricky, since I didn't have a stamp that said what I wanted to say.  So, I printed my saying onto white cardstock and die cut it with a cloud die (not easy since the particular die I used was not an "open" one, so I couldn't see where my message was).  Anyway, I got my message in the cloud and added another to complete my scene.

Then it was a simple matter of inking the edges of my panel and gluing it to my card front.  I sure hope my recipient likes it! 

Card #2:

 

This isn't as much of a scene, but what scene there is, I built using materials from two different papers from the pack.  The structure really makes the card, and is quite easy.  On the card front, I simply marked the mid-point of the right side, the left side, and the bottom.  Then I ran score lines from the top corners to the midpoint of the bottom, and then from the midpoints of the sides to the midpoint of the bottom.  I folded the first as mountain folds, and the rest as valley folds - creased them well, then glued them in place.  

It was pretty easy to cut the decorative paper, too.  I cut the paper to 4" x 5 1/4", then marked the midpoint along the bottom edge and sliced it from the upper corners to that midpoint (you may be able to see the results more clearly in the next picture.  I cut around some playful otters from another sheet in this set of papers, then stamped a greeting in Pecan Pie ink on a piece of Balmy Blue cardstock - matting it all on white before adding with dimensionals.  The stamp I used was from Spellbinders Typewriter Adventure Sentiments.  Here's what the card looks like when opened:

Card #3:

Here's another for which I didn't get any BEFORE pictures - which is a shame.  I'll still try to describe what I did.  

First, I fussy cut along the top of the scene - bushes and otters, then cut along the edge of the "river" - which was at a bit of an angle on the lower edge.  

I found some scraps in my stash of tan paper with some specks that I thought would look good as a riverbank and glued it in place along the lower cut edge.  Then I added a piece of Pool Party cardstock at the top to serve as sky.  

Then I fussy cut a small otter and die cut the pair of otters with weeds from another piece of the paper pack and added them along the lower edge of the "river".  I decided to add 3 Riverside Irregular Pearls (adhesive backed) - just because.  I inked the edges of the panel with Pecan Pie ink before adding a piece of Lost Lagoon cording across the top of the panel (taping it in place in back with regular transparent tape).  Finally, I stamped a greeting using Pool Party ink, cut the shape you see, and inked the edges before adding it in place over the cording using dimensionals. 

Card #4:

This time, I DID get a BEFORE picture:

 

You can see that at the top of this panel, the head is cut off of the otter.  This is the piece I focused on for this card!  I started by cutting off the bottom portion which was a nice scene. I saved this for a different card.

 

I used the top part of the panel and glued it to the bottom of a piece of Pool Party cardstock that was cut just a bit smaller than an A2 card.  Then I embossed just the top with the Soft Waves 3D embossing folder.  I inked the waves and the edges of the panel and it looked like this:

 

 

Then came the fun part!  I looked through my various cut-outs from a different page and found some pieces I wanted to use to cover up those otters that were missing , and die cut a few rocks and a bit of plants using dies from the Otterly Amazing die set.  I arranged all on my card as you can see in the picture below.

Before adding the panel to the card front, I criss-crossed some Lost Lagoon cording near the top of the card.  I created a sentiment piece using a stamp from the Otterly Amazing stamp set, some white cardstock, and Pool Party ink.

 

It's a lot of fun to take these gorgeous papers and make your own scene with them!

Chop Up Those Adorable Otters! - Part 2

My last post showed how I created some pretty cards using a single sheet of patterned paper from Stampin' Up! - their Otterly Adorable set.  I promised I'd demonstrate that it didn't matter how I cut up the sheet.  

This time I didn't pay any attention at all to the pattern (except to make sure the pattern was not sideways or upside down).  I simply cut the paper into 9 pieces.  For the first three pieces, I cut the paper horizontally at 5 1/4" - then cut that into 3 pieces each 4" wide.  The next three panels were cut the same way from the next 5 1/4" strip.  The final 3 pieces were cut from the remaining 1 1/2" strip - again cut into pieces 4" long.  I ended up with six 4" x 5 1/4" pieces and three that were 1 1/2" x 4" as you can see in the picture below:

So, what did I do with these?  Did I end up with fewer cards this way?  You'll see in the cards that follow.  

Chop Up Those Adorable Otters! - Part 1

Previously, I showed you one way of using a 12 x 12 scenic paper to make cards.  But what if your paper isn't a single scene like that one was.  What if it is instead a bunch of repeated smaller scenes all over the page?  I'm going to show you that it REALLY doesn't matter how you cut up papers like that!  To demonstrate this, I've used two identical 12 x 12 sheets of paper from the Otterly Adorable set of papers from Stampin' Up! ® ™  (All products used are from Stampin' Up! unless noted otherwise.)  

From the first piece of paper, I carefully cut out smaller scenes so they would fit on an A2 size card, but wouldn't necessarily fill it.  Here's a picture of the paper and how I cut it up:

Ignoring the smallest pieces, I had 2 panels from the first column, 4 panels from the 2nd, and 2 from the 3rd for a total of 8 which I used to make 9 cards.  Below you'll see the cards I made from this sheet.  I could have gotten pretty cards by just making standard fold cards, but I chose to make several into "fancy fold" cards as you can see below.